Products
Alpha Lipoic Acid (CAS: 1077-28-7)

Alpha Lipoic Acid CAS 1077-28-7 Bulk

Model:ALP-99
Alpha lipoic acid is a cyclic disulfide that works as a regenerable antioxidant in both water and fat phases, which is unusual. The commercial material is racemic, and its practical problems are physical rather than chemical: it melts near body temperature and polymerises into an insoluble film on.
  • ALP-99:

    Product Name: Alpha Lipoic Acid CAS No.: 1077-28-7 Molecular Formula: C8H14O2S2 Molecular Weight: 206.33 g/mol Appearance: Light-Yellow Solid Product Form: Crystalline solid Assay: ≥ 98.0% Melting Point: 60.0 °C - 62.0 °C Solubility: ethanol: 50 mg/mL; water solubility 0.9 g/L (20 °C) Grade Standard: USP / Food Grade HS Code: 29349900 Storage: Store below 25 °C in the dark under nitrogen where possible; heat and light both accelerate polymerisation. Packaging: 25 kg net (fibre drum with double PE liner) or as required Documentation: COA, TDS, MSDS and regulatory support available on request

Alpha Lipoic Acid

Product Overview

Alpha lipoic acid is a cyclic disulfide that works as a regenerable antioxidant in both water and fat phases, which is unusual. The commercial material is racemic, and its practical problems are physical rather than chemical: it melts near body temperature and polymerises into an insoluble film on storage.

Specification

Product NameAlpha Lipoic Acid
CAS No.1077-28-7
Molecular FormulaC8H14O2S2
Molecular Weight206.33 g/mol
AppearanceLight-Yellow Solid
Product FormCrystalline solid
Assay≥ 98.0%
Melting Point60.0 °C - 62.0 °C
Solubilityethanol: 50 mg/mL; water solubility 0.9 g/L (20 °C)
Grade StandardUSP / Food Grade
HS Code29349900
StorageStore below 25 °C in the dark under nitrogen where possible; heat and light both accelerate polymerisation.
Packaging25 kg net (fibre drum with double PE liner) or as required
DocumentationCOA, TDS, MSDS and regulatory support available on request

What This Grade Delivers

  • Racemic versus R-enriched: The R-enantiomer is the naturally occurring form and is more potent; R-enriched grades cost more and are specified where the label claims the natural isomer.
  • Polymer formation on storage: ALA sinters and forms insoluble oligomers above about 25 °C, showing as a sticky mass that will not dissolve; storage temperature is a quality parameter, not a comfort.
  • Redox cycling with vitamins C and E: Recycles oxidised ascorbate and tocopherol, which is the mechanistic reason it appears in antioxidant stacks rather than alone.
  • Oil and water partitioning: Slightly soluble in water and soluble in oils, so it distributes into both phases of an emulsion, an advantage over purely water-soluble antioxidants.

How It Performs in Application

  • Antioxidant supplements: 300-600 mg capsules, often with acetyl-L-carnitine.
  • Blood sugar support: Formulas for insulin sensitivity and diabetic neuropathy.
  • Weight management: Combined with green tea extract and carnitine in metabolic blends.
  • Cosmetics: Antioxidant and anti-inflammatory active in serums, where the racemic form is standard.

Formulation & Handling Notes

Keep ALA below 25 °C. Above its melting range it sinters into an insoluble polymer that no amount of milling will fully recover, and the lot becomes unusable for capsule filling.

Market Supply & Sourcing

ALA is produced in China and in a few European plants, and the synthesis route determines the polymer content that troubles capsule fillers. Capacity is modest relative to antioxidant-segment demand, so shortages appear quickly when a plant goes offline.

Frequently Asked Questions

Which specification does your Alpha Lipoic Acid meet?

Material is released to USP / Food Grade, with the assay and product-specific parameters stated on every COA, including racemic versus r-enriched.

Can Alpha Lipoic Acid be used in antioxidant supplements?

300-600 mg capsules, often with acetyl-L-carnitine.

What storage conditions does Alpha Lipoic Acid need?

Store below 25 °C in the dark under nitrogen where possible; heat and light both accelerate polymerisation.

Supply, Documentation & Packaging

Packed from 25 kg in double PE-lined fibre drums and shipped from Shanghai / Ningbo / Qingdao within 7-15 working days after PO. Every lot is released against USP / Food Grade with a batch-specific COA, TDS and MSDS. superpharmagroup supplies this product as a bulk raw material only; it does not manufacture or sell finished dosage forms. GMP, ISO 9001, ISO 14001, CEP/DMF support documentation available on request.

Frequently sourced alongside this product

MSM (Methylsulfonylmethane) (CAS 67-71-0) · Menthol Crystal (CAS 89-78-1) · Phytosterol (CAS 83-46-5) · Sodium Copper Chlorophyllin (CAS 11006-34-1) · Coenzyme Q10 (CAS 303-98-0) · L-Carnitine tartrate (CAS 36687-82-8). Specification sheets, COA and samples for any of these grades can be requested on the same inquiry.

Application guide: Sports nutrition sourcing

Send Inquiry
Contact Info

address

EU Warehouse
NA Warehouse

whatsapp

Please click the WhatsApp link.

Email

Please click the WhatsApp link.

Telegram

Please click the WhatsApp link.

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept