Products
Dextrose Anhydrous (CAS: 50-99-7)

Dextrose Anhydrous CAS 50-99-7 Bulk

Model:DXT-99
Dextrose anhydrous is D-glucose with a dextrose equivalent of 100, about 0.7 of the sweetness of sucrose. Its value in manufacturing is less about sweetness and more about being a clean, non-hygroscopic, compressible sugar that feeds fermentation and carries tablets.
  • DXT-99:

    Product Name: Dextrose Anhydrous CAS No.: 50-99-7 Molecular Formula: C6H12O6 Molecular Weight: 180.16 g/mol Appearance: White or almost white, crystalline powder Product Form: Powder Assay: ≥ 99.0% Melting Point: 150.0 °C - 152.0 °C Solubility: H2O: 1 M at 20 °C, clear, colorless; water solubility Soluble Grade Standard: FCC / USP / EP monograph HS Code: 17023051 Storage: Store below 30 °C in a dry place; the anhydrous form is less hygroscopic than the monohydrate but still cakes if wetted. Packaging: 25 kg net (fibre drum with double PE liner) or as required Documentation: COA, TDS, MSDS and regulatory support available on request

Dextrose Anhydrous

Product Overview

Dextrose anhydrous is D-glucose with a dextrose equivalent of 100, about 0.7 of the sweetness of sucrose. Its value in manufacturing is less about sweetness and more about being a clean, non-hygroscopic, compressible sugar that feeds fermentation and carries tablets.

Specification

Product NameDextrose Anhydrous
CAS No.50-99-7
Molecular FormulaC6H12O6
Molecular Weight180.16 g/mol
AppearanceWhite or almost white, crystalline powder
Product FormPowder
Assay≥ 99.0%
Melting Point150.0 °C - 152.0 °C
SolubilityH2O: 1 M at 20 °C, clear, colorless; water solubility Soluble
Grade StandardFCC / USP / EP monograph
HS Code17023051
StorageStore below 30 °C in a dry place; the anhydrous form is less hygroscopic than the monohydrate but still cakes if wetted.
Packaging25 kg net (fibre drum with double PE liner) or as required
DocumentationCOA, TDS, MSDS and regulatory support available on request

What This Grade Delivers

  • Anhydrous versus monohydrate: The anhydrous form carries no water of crystallisation, so it does not release moisture into a tablet or dry blend the way the monohydrate can.
  • Compression and dilution: Direct-compression grades carry the bulk of a low-dose tablet and give a hard, non-friable compact.
  • Fermentation carbon source: A readily assimilable sugar for amino acid, enzyme and antibiotic fermentations, with consistent DE.
  • Particle size range: Fine, medium and coarse cuts for tablet cores, dry mixes and confectionery respectively.

How It Performs in Application

  • Tablets and lozenges: Diluent and binder in direct compression and wet granulation.
  • Fermentation media: Carbon source for amino acid, vitamin and enzyme production.
  • Beverages and dry mixes: Bulking and sweetness in powdered drinks and instant products.
  • Pharmaceutical infusions: Pharmaceutical grade for intravenous solutions.

Formulation & Handling Notes

Dextrose is a reducing sugar and will brown in the presence of amines and heat, so it is a poor choice where a white or clear product must survive thermal processing. Sorbitol or mannitol would be used there instead.

Market Supply & Sourcing

Dextrose is a corn wet-milling commodity, and Chinese and US plants set the global price. The anhydrous grade is a smaller stream than the monohydrate and usually sells at a premium for tableting and fermentation use.

Frequently Asked Questions

Which specification does your Dextrose Anhydrous meet?

Material is released to FCC / USP / EP monograph, with the assay and product-specific parameters stated on every COA, including anhydrous versus monohydrate.

Can Dextrose Anhydrous be used in tablets and lozenges?

Diluent and binder in direct compression and wet granulation.

What storage conditions does Dextrose Anhydrous need?

Store below 30 °C in a dry place; the anhydrous form is less hygroscopic than the monohydrate but still cakes if wetted.

Supply, Documentation & Packaging

Packed from 25 kg in double PE-lined fibre drums and shipped from Shanghai / Ningbo / Qingdao within 7-15 working days after PO. Every lot is released against FCC / USP / EP monograph with a batch-specific COA, TDS and MSDS. superpharmagroup supplies this product as a bulk raw material only; it does not manufacture or sell finished dosage forms. GMP, ISO 9001, ISO 14001, CEP/DMF support documentation available on request.

More bulk ingredients from this category

Sucralose (CAS 56038-13-2) · Acesulfame Potassium (CAS 55589-62-3) · Aspartame (CAS 22839-47-0) · Fructose (CAS 57-48-7) · Mannitol (CAS 69-65-8) · Sodium erythorbate (CAS 6381-77-7). Specification sheets, COA and samples for any of these grades can be requested on the same inquiry.

Application guide: Pharma excipients

Send Inquiry
Contact Info

address

EU Warehouse
NA Warehouse

whatsapp

Please click the WhatsApp link.

Email

Please click the WhatsApp link.

Telegram

Please click the WhatsApp link.

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept