Products
Sucralose (CAS: 56038-13-2)

Sucralose CAS 56038-13-2 Bulk Supplier

Model:SCR-99
Sucralose is made from sucrose by selective chlorination, which turns a sugar into a molecule about 600 times as sweet that the body does not metabolise. It has the closest taste profile to sugar of any high-intensity sweetener and enough heat stability for baking.
  • SCR-99:

    Product Name: Sucralose CAS No.: 56038-13-2 Molecular Formula: C12H19Cl3O8 Molecular Weight: 397.63 g/mol Appearance: Sucralose is a white to off-white colored, free-flowing, crystalline powder Product Form: Powder Assay: ≥ 98.0% Melting Point: 115.0 °C - 1018.0 °C Solubility: Soluble in Water Grade Standard: FCC / USP / EP monograph HS Code: 29321900 Storage: Store below 25 °C in a dry place; stable and non-hygroscopic in sealed containers. Packaging: 25 kg net (fibre drum with double PE liner) or as required Documentation: COA, TDS, MSDS and regulatory support available on request

Sucralose

Product Overview

Sucralose is made from sucrose by selective chlorination, which turns a sugar into a molecule about 600 times as sweet that the body does not metabolise. It has the closest taste profile to sugar of any high-intensity sweetener and enough heat stability for baking.

Specification

Product NameSucralose
CAS No.56038-13-2
Molecular FormulaC12H19Cl3O8
Molecular Weight397.63 g/mol
AppearanceSucralose is a white to off-white colored, free-flowing, crystalline powder
Product FormPowder
Assay≥ 98.0%
Melting Point115.0 °C - 1018.0 °C
SolubilitySoluble in Water
Grade StandardFCC / USP / EP monograph
HS Code29321900
StorageStore below 25 °C in a dry place; stable and non-hygroscopic in sealed containers.
Packaging25 kg net (fibre drum with double PE liner) or as required
DocumentationCOA, TDS, MSDS and regulatory support available on request

Grade Highlights

  • 600 times sucrose, sugar-like taste: No bitter metallic tail at normal use levels, so it can carry a product alone rather than in a blend.
  • Heat stability: Survives baking and pasteurisation, with degradation only at prolonged high temperature in acidic, low-moisture systems.
  • High solubility about 280 g/L: Enough for concentrated syrups and table-top liquids without solubilisers.
  • Purity and chlorinated impurity limits: Released at 98.0% minimum with limits on the chlorinated by-products that the synthesis can leave behind.

Typical Applications

  • Beverages: Diet soft drinks and flavoured waters at 50-300 mg/L depending on the matrix.
  • Bakery: Reduced-sugar cakes and biscuits, where ace-K and stevia would not survive the oven.
  • Table-top sweeteners: Sachets and tablets, often with maltodextrin for volume.
  • Dairy and confectionery: Sugar-free ice cream, chewing gum and jellies.

Formulation & Handling Notes

Sucralose can hydrolyse slowly in acidic beverages held at high temperature, and the resulting chlorinated sugars are the reason shelf-life studies matter for low-pH, long-life products. At ambient storage the loss is negligible.

Market Supply & Sourcing

Sucralose capacity is concentrated in China, and the chlorination step is both the environmental and the cost bottleneck. Patent expiry lowered prices for a decade, but tighter environmental rules and consolidation have made the market less predictable.

Frequently Asked Questions

Which specification does your Sucralose meet?

Material is released to FCC / USP / EP monograph, with the assay and product-specific parameters stated on every COA, including 600 times sucrose, sugar-like taste.

Can Sucralose be used in beverages?

Diet soft drinks and flavoured waters at 50-300 mg/L depending on the matrix.

What storage conditions does Sucralose need?

Store below 25 °C in a dry place; stable and non-hygroscopic in sealed containers.

Supply, Documentation & Packaging

Packed from 25 kg in double PE-lined fibre drums and shipped from Shanghai / Ningbo / Qingdao within 7-15 working days after PO. Every lot is released against FCC / USP / EP monograph with a batch-specific COA, TDS and MSDS. superpharmagroup supplies this product as a bulk raw material only; it does not manufacture or sell finished dosage forms. GMP, ISO 9001, ISO 14001, CEP/DMF support documentation available on request.

More bulk ingredients from this category

Aspartame (CAS 22839-47-0) · Dextrose Anhydrous (CAS 50-99-7) · Fructose (CAS 57-48-7) · Mannitol (CAS 69-65-8) · Stevioside (CAS 57817-89-7) · Sodium erythorbate (CAS 6381-77-7). Specification sheets, COA and samples for any of these grades can be requested on the same inquiry.

Application guide: Energy drink formulation

Send Inquiry
Contact Info

address

EU Warehouse
NA Warehouse

whatsapp

Please click the WhatsApp link.

Email

Please click the WhatsApp link.

Telegram

Please click the WhatsApp link.

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept