Products
Acesulfame Potassium (CAS: 55589-62-3)

Acesulfame Potassium CAS 55589-62-3

Model:ACS-99
Acesulfame potassium is about 200 times as sweet as sucrose and, unlike aspartame, it keeps its sweetness through pasteurisation, UHT and baking. Its weakness is a bitter, metallic tail at higher use levels, which is why it is almost always blended with sucralose, aspartame or a polyol.
  • ACS-99:

    Product Name: Acesulfame Potassium CAS No.: 55589-62-3 Molecular Formula: C4H5KNO4S Molecular Weight: 202.25 g/mol Appearance: White to Off-White Solid Product Form: Crystalline solid Assay: 99.0-101.0% Melting Point: 229.0 °C - 232.0 °C Solubility: Soluble in water, very slightly soluble in acetone and in ethanol (96 per cent); water solubility almost transparency Grade Standard: FCC / USP / EP monograph HS Code: 2934990002 Storage: Store below 25 °C in a dry place; non-hygroscopic and stable for at least 3 years in sealed containers. Packaging: 25 kg net (fibre drum with double PE liner) or as required Documentation: COA, TDS, MSDS and regulatory support available on request

Acesulfame Potassium

Product Overview

Acesulfame potassium is about 200 times as sweet as sucrose and, unlike aspartame, it keeps its sweetness through pasteurisation, UHT and baking. Its weakness is a bitter, metallic tail at higher use levels, which is why it is almost always blended with sucralose, aspartame or a polyol.

Specification

Product NameAcesulfame Potassium
CAS No.55589-62-3
Molecular FormulaC4H5KNO4S
Molecular Weight202.25 g/mol
AppearanceWhite to Off-White Solid
Product FormCrystalline solid
Assay99.0-101.0%
Melting Point229.0 °C - 232.0 °C
SolubilitySoluble in water, very slightly soluble in acetone and in ethanol (96 per cent); water solubility almost transparency
Grade StandardFCC / USP / EP monograph
HS Code2934990002
StorageStore below 25 °C in a dry place; non-hygroscopic and stable for at least 3 years in sealed containers.
Packaging25 kg net (fibre drum with double PE liner) or as required
DocumentationCOA, TDS, MSDS and regulatory support available on request

What This Grade Delivers

  • Heat and pH stability: No measurable loss through UHT, hot fill or bakery conditions, making it the high-intensity sweetener of choice where aspartame would hydrolyse.
  • Blending behaviour: Its bitterness is suppressed by sucralose and its sweetness profile rounded by aspartame, so blends taste closer to sucrose than either component alone.
  • Assay 99.0-101.0%: Released with a limit on acetoacetamide, the synthesis by-product that regulators monitor in this molecule.
  • Particle size for dry mixes: Fine powder dissolves quickly in beverages; granular cut flows better in table-top sachets and dry blends.

How It Performs in Application

  • Carbonated and still beverages: Typically 100-200 mg/L, often in a blend with sucralose or aspartame.
  • Table-top sweeteners: The bulk component in sachets and tablets, blended with a bulking agent.
  • Confectionery and bakery: Chewing gum, jellies and baked goods where aspartame would not survive the process.
  • Dairy and plant-based: Flavoured yoghurt and plant drinks, where acid stability is essential.

Formulation & Handling Notes

Ace-K contains about 11% potassium by weight, which matters for products making a low-potassium claim. It also has a lingering sweet tail that becomes obvious above roughly 300 mg/L, so keep the blend ratio in mind.

Market Supply & Sourcing

Ace-K is produced in China and Europe from diketene and sulfamic acid, and diketene handling is what limits the number of qualified plants. Environmental scrutiny of that chemistry has repeatedly tightened supply and pushed prices up.

Frequently Asked Questions

Which specification does your Acesulfame Potassium meet?

Material is released to FCC / USP / EP monograph, with the assay and product-specific parameters stated on every COA, including heat and ph stability.

Can Acesulfame Potassium be used in carbonated and still beverages?

Typically 100-200 mg/L, often in a blend with sucralose or aspartame.

What storage conditions does Acesulfame Potassium need?

Store below 25 °C in a dry place; non-hygroscopic and stable for at least 3 years in sealed containers.

Supply, Documentation & Packaging

Packed from 25 kg in double PE-lined fibre drums and shipped from Shanghai / Ningbo / Qingdao within 7-15 working days after PO. Every lot is released against FCC / USP / EP monograph with a batch-specific COA, TDS and MSDS. superpharmagroup supplies this product as a bulk raw material only; it does not manufacture or sell finished dosage forms. GMP, ISO 9001, ISO 14001, CEP/DMF support documentation available on request.

Frequently sourced alongside this product

Fructose (CAS 57-48-7) · Mannitol (CAS 69-65-8) · Stevioside (CAS 57817-89-7) · Sucralose (CAS 56038-13-2) · Aspartame (CAS 22839-47-0) · Sodium benzoate (CAS 532-32-1). Specification sheets, COA and samples for any of these grades can be requested on the same inquiry.

Application guide: Energy drink formulation

Send Inquiry
Contact Info

address

EU Warehouse
NA Warehouse

whatsapp

Please click the WhatsApp link.

Email

Please click the WhatsApp link.

Telegram

Please click the WhatsApp link.

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept