Products
Sodium benzoate (CAS: 532-32-1)

Sodium Benzoate CAS 532-32-1 Bulk

Model:SDM-99
Sodium benzoate is the most cost-effective preservative for acidic beverages, but it only works in acid: below pH 4.5 the undissociated benzoic acid is the active species, and above pH 5 there is essentially no preservation.
  • SDM-99:

    Product Name: Sodium benzoate CAS No.: 532-32-1 Molecular Formula: C7H5NaO2 Molecular Weight: 144.1 g/mol Appearance: Sodium benzoate is a white crystalline solid Product Form: Crystalline solid Assay: 99.0-100.5% Melting Point: 300.0 °C Solubility: H2O: 1 M at 20 °C, clear, colorless; water solubility soluble Grade Standard: FCC / E-number compliance HS Code: 29163100 Storage: Store below 25 °C in a dry place; the powder is hygroscopic and should be kept sealed. Packaging: 25 kg net (fibre drum with double PE liner) or as required Documentation: COA, TDS, MSDS and regulatory support available on request

Sodium benzoate

Product Overview

Sodium benzoate is the most cost-effective preservative for acidic beverages, but it only works in acid: below pH 4.5 the undissociated benzoic acid is the active species, and above pH 5 there is essentially no preservation. It also reacts with ascorbic acid to form benzene, a combination regulators watch closely.

Specification

Product NameSodium benzoate
CAS No.532-32-1
Molecular FormulaC7H5NaO2
Molecular Weight144.1 g/mol
AppearanceSodium benzoate is a white crystalline solid
Product FormCrystalline solid
Assay99.0-100.5%
Melting Point300.0 °C
SolubilityH2O: 1 M at 20 °C, clear, colorless; water solubility soluble
Grade StandardFCC / E-number compliance
HS Code29163100
StorageStore below 25 °C in a dry place; the powder is hygroscopic and should be kept sealed.
Packaging25 kg net (fibre drum with double PE liner) or as required
DocumentationCOA, TDS, MSDS and regulatory support available on request

Grade Highlights

  • pH 4.5 is the working limit: At pH 4 benzoate is largely undissociated and effective; at pH 5 most of it is ionised and the dose required becomes impractical.
  • Benzene formation risk: In the presence of ascorbic acid and trace metals, benzoate can decarboxylate to benzene; soft drinks containing both are formulated and tested with this in mind.
  • Taste threshold: Perceptible at higher doses as a sweet-bitter note, which caps how much can be added even where legally permitted.
  • High solubility: About 630 g/L, so stock solutions are easy and dosing is accurate in continuous beverage lines.

Typical Applications

  • Carbonated soft drinks: 0.01-0.05% in acidic drinks, often with sorbate or EDTA.
  • Sauces and pickles: Preservation of acidified products where pH is already below 4.
  • Personal care: Preservative in rinse-off and some leave-on products.
  • Pharmaceuticals: Preservative in oral liquids and syrups.

Formulation & Handling Notes

Do not combine benzoate with ascorbic acid in a beverage without testing for benzene, and never with a copper or iron catalyst present. This is a compliance issue, not a taste issue.

Market Supply & Sourcing

Sodium benzoate is made from toluene oxidation to benzoic acid, so supply and price track toluene and the Chinese benzoic acid industry. Food-grade material is a smaller stream than technical grade and is specified on taste and colour.

Frequently Asked Questions

Which specification does your Sodium benzoate meet?

Material is released to FCC / E-number compliance, with the assay and product-specific parameters stated on every COA, including ph 4.5 is the working limit.

Can Sodium benzoate be used in carbonated soft drinks?

0.01-0.05% in acidic drinks, often with sorbate or EDTA.

What storage conditions does Sodium benzoate need?

Store below 25 °C in a dry place; the powder is hygroscopic and should be kept sealed.

Supply, Documentation & Packaging

Packed from 25 kg in double PE-lined fibre drums and shipped from Shanghai / Ningbo / Qingdao within 7-15 working days after PO. Every lot is released against FCC / E-number compliance with a batch-specific COA, TDS and MSDS. superpharmagroup supplies this product as a bulk raw material only; it does not manufacture or sell finished dosage forms. GMP, ISO 9001, ISO 14001, CEP/DMF support documentation available on request.

Other bulk materials from the same range

Fumaric acid (CAS 110-17-8) · Potassium sorbate (CAS 24634-61-5) · Sodium erythorbate (CAS 6381-77-7) · Stevioside (CAS 57817-89-7). Specification sheets, COA and samples for any of these grades can be requested on the same inquiry.

Application guide: Energy drink formulation · Beverage preservation

Send Inquiry
Contact Info

address

EU Warehouse
NA Warehouse

whatsapp

Please click the WhatsApp link.

Email

Please click the WhatsApp link.

Telegram

Please click the WhatsApp link.

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept