Products
Fumaric acid (CAS: 110-17-8)

Fumaric Acid CAS 110-17-8 Bulk

Model:FMR-99
Fumaric acid is a dicarboxylic acid with about 1.5 times the acidifying power of citric acid per unit weight and a solubility of only 6.3 g/L at 25 °C. That low solubility is not a defect: it gives a slow, sustained sourness in dry mixes and keeps the powder free-flowing in humid plants.
  • FMR-99:

    Product Name: Fumaric acid CAS No.: 110-17-8 Molecular Formula: C4H4O4 Molecular Weight: 116.07 g/mol Appearance: Fumaric acid is a colorless to white, odorless crystalline powder Product Form: Powder Assay: ≥ 99.5% Melting Point: 298.0 °C - 300.0 °C Solubility: 95% ethanol: soluble0.46g/10 mL, clear, colorless; water solubility 0.63 g/100 mL (25 °C) Grade Standard: FCC / E-number compliance HS Code: 29171900 Storage: Store below 30 °C in a dry place; non-hygroscopic and stable in sealed containers. Packaging: 25 kg net (fibre drum with double PE liner) or as required Documentation: COA, TDS, MSDS and regulatory support available on request

Fumaric acid

Product Overview

Fumaric acid is a dicarboxylic acid with about 1.5 times the acidifying power of citric acid per unit weight and a solubility of only 6.3 g/L at 25 °C. That low solubility is not a defect: it gives a slow, sustained sourness in dry mixes and keeps the powder free-flowing in humid plants.

Specification

Product NameFumaric acid
CAS No.110-17-8
Molecular FormulaC4H4O4
Molecular Weight116.07 g/mol
AppearanceFumaric acid is a colorless to white, odorless crystalline powder
Product FormPowder
Assay≥ 99.5%
Melting Point298.0 °C - 300.0 °C
Solubility95% ethanol: soluble0.46g/10 mL, clear, colorless; water solubility 0.63 g/100 mL (25 °C)
Grade StandardFCC / E-number compliance
HS Code29171900
StorageStore below 30 °C in a dry place; non-hygroscopic and stable in sealed containers.
Packaging25 kg net (fibre drum with double PE liner) or as required
DocumentationCOA, TDS, MSDS and regulatory support available on request

Why Formulators Specify This Grade

  • 1.5 times citric acid acidity: Lower use levels for the same pH, which matters in dry mixes where the acid also carries cost and bulk.
  • Very low solubility, used deliberately: Dissolves slowly, so sourness develops gradually in the mouth and the acid does not migrate into a dry blend during storage.
  • Non-hygroscopic, unlike citric: Citric acid monohydrate cakes in humid air; fumaric acid stays free-flowing, which is why it is preferred in tropical markets.
  • High melting point and low reactivity: Does not participate in the browning and hygroscopicity problems that the more soluble acids create.

Where It Is Used

  • Dry beverage mixes: Instant drink powders, where slow dissolution prevents the sour spike of citric acid.
  • Bakery leavening: Acid component in chemical leavening systems, reacting on heating.
  • Gelatin and confectionery: Acidulant in gelatin desserts and jellies, where a controlled set matters.
  • Feed acidifier: Gut-pH reduction in swine and poultry diets, often coated for targeted release.

Formulation & Handling Notes

Fumaric acid does not dissolve quickly enough for a ready-to-drink syrup or a clear beverage. Use citric, malic or lactic acid where immediate sourness and full solubility are required.

Market Supply & Sourcing

Fumaric acid is produced from maleic anhydride, so its price follows that feedstock and the phthalate-plasticiser demand that shares it. Chinese producers hold most of the food-grade capacity.

Frequently Asked Questions

What grade of Fumaric acid do you supply?

Material is released to FCC / E-number compliance, with the assay and product-specific parameters stated on every COA, including 1.5 times citric acid acidity.

Can Fumaric acid be used in dry beverage mixes?

Instant drink powders, where slow dissolution prevents the sour spike of citric acid.

How should Fumaric acid be stored?

Store below 30 °C in a dry place; non-hygroscopic and stable in sealed containers.

Supply, Documentation & Packaging

Bulk supply from 25 kg in fibre drums with double PE liner, palletised for sea or air freight from Shanghai / Ningbo / Qingdao. Lead time 7-15 working days after PO. COA, TDS and MSDS are issued per batch; GMP, ISO 9001, ISO 14001, CEP/DMF support documentation and regulatory support are available on request. Supplied strictly as a raw material for further processing, not as a finished dosage form.

More bulk ingredients from this category

Potassium sorbate (CAS 24634-61-5) · Sodium benzoate (CAS 532-32-1) · Sodium erythorbate (CAS 6381-77-7) · Sucralose (CAS 56038-13-2). Specification sheets, COA and samples for any of these grades can be requested on the same inquiry.

Application guide: Energy drink formulation · Beverage preservation

Send Inquiry
Contact Info

address

EU Warehouse
NA Warehouse

whatsapp

Please click the WhatsApp link.

Email

Please click the WhatsApp link.

Telegram

Please click the WhatsApp link.

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept